Hydraulic Fluid Remover
Proprietary cleaner designed to easily remove all hydraulic fluids
Economic Cleaner
General purpose cleaner with a broad range of applications
Heavy Duty Cleaner
Environmentally friendly specialty cleaning
Industrial Cleaner
Removes all kinds of oil, grease and dirt from surfaces without effort
Oxygen Cleaner
Cleans all oxygen handling equipment
eOx® Heavy Duty Cleaner
Description
eOx Heavy Duty Cleaner (HDC) is an environmentally friendly specialty-cleaning product designed to remove asphalt, carbon deposits, crude oil, resins and many other types of oils and greases. It is a water based blend of vegetable emulsifiers, surfactants and sequestering agents with a light citrus smell. eOx HDC is a universal cleaner for heavy degreasing and contamination problems. eOx HDC has a double action cleaning system:
Softens and dissolves carbon deposits
Emulsifies dissolved oil and disperses or removes it by rinsing well with clean water. The resulting emulsion is stable yet can be precipitated out or separated to further reduce waste disposal.
Advantages
Non-toxic
Non-flammable
Non-hazardous – Not subject to dangerous goods regulations
No phosphates, acids or silicones
High biodegradability (tested by the University of Ghent, Belgium)
Does not emulsify, resulting in excellent oil and water separation
Fresh smell
Safe to use on all metals, plastics, lacquer paints, floors, walls, ceilings, etc
Application
eOx HDC is a highly effective agent for cleaning storage tanks, tank walls, tank truck, heat exchangers, pipelines, floors, equipment, vehicles, and machinery. Cleaning applications include hydrocarbon residues, roofing tar, crude oils, asphalt, tar-like deposits, oils and grease.
Directions for use
Depending upon the type and thickness of the contamination, the general cleaning time will be between 10-60 minutes. The selected temperature of the water may range up to 140°F (60C). The removal of heavy hydrocarbon residues may require between 10-20 hours. After cleaning, simply rinsed with water. Due to the exceptional cleaning capability of eOx HDC using circulation cleaning, more than one cleaning batch can be simultaneously processed. HDC can be safely used on most metals and structural materials. Some examples are below:
Method: Immersion system
Dilution: Full strength or 1:1 with water
Place item to be cleaned in immersion system containing eOx HDC.
Allow to soak. Soaking time will depend on type and thickness of the contamination but may range from 10-60 minutes.
Agitation may reduce soaking time, as may heating the eOx HDC to 60C maximum.
Rinse with clean water.
Dry.
Repeat if necessary.
Method: Ultrasonic Cleaning Machine
Dilution: Full strength or 1:1 with water
Fill ultrasonic machine with eOx HDC
Contact time will depend on type and thickness of the contamination but may range from 1 – 5 minutes.
Rinse with clean water.
Repeat if necessary.
Dry
Method: Manual Application & Low Pressure Cleaning
Dilution: Full strength or 1:1 with water
Spray eOx HDC on surface to be cleaned
Scrub surface with brush
Rinse with clean water.
Repeat if necessary.
Dry
Method: High Pressure Cleaning
Dilution: 1:50 to 1:100 with water
Dilute HDC or adjust sprayer pickup depending on the level of contamination.
Spray eOx HDC on surface to be cleaned
Rinse with clean water.
Repeat if necessary.
Dry
Package Sizes
1-gallon poly bottles
4 x 1-gallon cases
55-gallon poly drums
Shelf Life
4-years
Storage
Do not store under 35°F/2C and not above 122°F/50C. Do not use below 35°F/2C.
Properties
NFPA Hazard Class: Health 1
Flammability 2
Reactivity 0
VOC: 285 g/L
pH: 9
Flash point: <158°F / 70C